TRACE32 Revision History 문서 원본 보기

<h2><span style="color: #999999;">March 2015</span></h2>
<p><span style="font-size: large;"><strong>New TRACE32 Feature</strong></span></p>
<p><strong>build number: 61531, 2015-03-17</strong></p>
<p>architecture: ARMv8/ARM64</p>
<p>affected commands: SYStem.CPU *</p>
<p>description: Added support for Cortex-A72/Cortex-A53 big.LITTLE system</p>
<p>&nbsp;</p>
<p><strong>build number: 61241, 2015-03-07</strong></p>
<p>architecture: ARMv8/ARM64</p>
<p>affected commands: SYStem.CPU *</p>
<p>description: Added support for Cortex-A72</p>
<p>&nbsp;</p>
<p><strong>build number: 60927, 2015-02-25</strong></p>
<p>architecture: TriCore</p>
<p>affected commands: Trace.*</p>
<p>description: Added support for TC23x Emulation Devices.</p>
<p>&nbsp;</p>
<p><strong>build number: 60602, 2015-01-25</strong></p>
<p>architecture: Hexagon</p>
<p>affected commands: frame.config.eabi [on|off]</p>
<p>description: New option forces the stack unwinding algorithm to follow the frame-pointer/link-register pairs.</p>
<p>&nbsp;</p>
<p><strong>build number: &nbsp;&nbsp; 60602, 2015-01-25</strong></p>
<p>architecture: PowerPC</p>
<p>affected commands: frame.config.eabi [on|off]</p>
<p>description: New option forces the stack unwinding algorithm to follow the frame-pointer/link-register pairs.</p>
<p>&nbsp;</p>
<p><strong>build number: &nbsp;&nbsp; 61220, 2015-03-06</strong></p>
<p>architecture: All</p>
<p>affected commands: MMU.COMMON, TRANS.COMMON</p>
<p>description: Old way of specifiying multiple COMMON address ranges with OR operation has been removed (TRANS.COMMON 0x80000000--0x8FFFFFFF||0xA0000000--0xBFFFFFFF).</p>
<p>Please use spaces instead of logical OR (||) to separate multiple address ranges in one command line (TRANS.COMMON 0x80000000--0x8FFFFFFF 0xA0000000--0xBFFFFFFF) or use TRANS.COMMON.ADD to specify additional address ranges</p>
<p>(TRANS.COMMON 0x80000000--0x8FFFFFFF&nbsp;&nbsp;&nbsp; TRANS.COMMON.ADD 0xA0000000--0xBFFFFFFF). This change was necessary to prevent hard to find errors when users specify incorrect address ranges in the old implementation.</p>
<p>&nbsp;</p>
<p><strong>build number: 61090, 2015-03-03</strong></p>
<p>architecture: MIPS64</p>
<p>affected commands: MMU.FORMAT</p>
<p>description: New MMU format LINUX64HTLBP16 added. Needed for Linux 2.6.32 with 16kByte page size.</p>
<p>&nbsp;</p>
<p><strong>build number: 2015-11-03</strong></p>
<p>architecture: TriCore</p>
<p>description: New TriCore CPUs added/tested: TC297TF</p>
<p>&nbsp;</p>
<p><strong>build number: 61297, 2015-03-10</strong></p>
<p>architecture: all</p>
<p>affected commands: Remote API</p>
<p>description: 64bit library for Linux</p>
<p>&nbsp;</p>
<p><strong>build number: 61394, 2015-03-13</strong></p>
<p>architecture: all</p>
<p>affected commands: Remote API</p>
<p>description: Access to x64 128bit registers</p>
<p>&nbsp;</p>
<p><span style="font-size: small;"><strong>New peripheral files:</strong></span></p>
<p>perstm32l0.per : new for STM32L051C6, STM32L051C8, STM32L051K6, STM32L051K8, STM32L051R6, STM32L051R8, STM32L051T6, STM32L051T8, STM32L052C6, STM32L052C8, STM32L052K6, STM32L052K8, STM32L052R6, STM32L052R8, STM32L052T6, STM32L052T8, STM32L053C6, STM32L053C8, STM32L053R6, STM32L053R8, STM32L062K8, STM32L063C8, STM32L063R8</p>
<p>perkeystone2.per : upated for 66AK2H06, 66AK2H12, TCI6634K2K, TCI6636K2H, TCI6638K2K, 66AK2H14, 66AK2E02, 66AK2E05, AM5K2E02, AM5K2E04, TCI6630K2L</p>
<p>permpc830x.per : updated for MPC8306, MPC8308, MPC8309</p>
<p>&nbsp;</p>
<p><strong>Other news:</strong></p>
<p>ARM Demo boards: Ready to use demos for Arm architecture downloadable.</p>
<p>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; : EBV SoCrates with Altera CycloneV - Linux + AMP + Trace(CortexA9 SMP + Altera Nios)</p>
<p>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; : ZedBoard with Xilinx ZYNQ-7000 - Linux + Trace (CortexA9 SMP)&nbsp;&nbsp;</p>
<p>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; : K70F120 with Freescale CortexM4&nbsp; - uCLinux (CortexM4)</p>
<p>&nbsp;</p>
<h2><span style="color: #999999;">February 2015</span></h2>
<p><span style="font-size: large;"><strong>New TRACE32 Feature</strong></span></p>
<p><span>Architecture : 78K0R / RL78</span></p>
<p><span>Description :&nbsp; POWER DEBUG PRO supports 78K0R and RL78.</span></p>
<h2><span style="font-size: large; color: #888888;"><strong>January 2015</strong></span></h2>
<p><span style="font-size: large;"><strong>New TRACE32 Feature</strong></span></p>
<p><strong><span style="font-size: small;">Build Number 60096, 01/2015</span></strong></p>
<p><span style="font-size: small;">Architecture : 78K0R / RL78</span></p>
<p><span style="font-size: small;">Description :&nbsp; POWER DEBUG PRO supports 78K0R and RL78.</span></p>
<p>&nbsp;</p>
<p><strong><span style="font-size: small;">Build Number 01/2015</span></strong></p>
<p><span style="font-size: small;">Architecture : PowerPC, TriCore, all if adapted accordingly</span></p>
<p><span style="font-size: small;">Description :&nbsp; New zip-file of TRACE32 Integration for Simulink, incl. PIL, in addition complete demo bundle with demo models and trail version</span></p>
<p><span style="font-size: small;">&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;of TRACE32, available for download at www.lauterbach.com/intsimulink.html , redesign of website with lots of infos</span></p>
<p><strong><span style="font-size: small;">Architecture : ARM</span></strong></p>
<p><span style="font-size: small;">Affected commands : TPIU.SWVPrescaler &lt;value&gt;</span></p>
<p><span style="font-size: small;">Description : The new command affects the ARM Serial Wire Output (SWV) baud rate. It replaces the old TPIU.PortMode NRZ/2 to NRZ/4.</span></p>
<p><span style="font-size: small;">&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Now you select only NRZ and set the prescaler by the new command, which allows a much more wider spectrum of diffent baudrates.</span></p>
<p>&nbsp;</p>
<p><strong><span style="font-size: small;">Build Number 2015-01-21</span></strong></p>
<p><span style="font-size: small;">Architecture : all</span></p>
<p><span style="font-size: small;">Affected commands : VERSION.SERIAL.NEXUS(), VERSION.SERIAL.POWERPROBE(), VERSION.SERIAL.Integrator()</span></p>
<p><span style="font-size: small;">Description : New PRACTICE functions, to read serial numbers of Lauterbach hardware:</span></p>
<p><span style="font-size: small;">&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; VERSION.SERIAL.NEXUS()&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Returns the first serial number of your Nexus Adapter. If no Nexus Adapter is plugged it returns the serial number of your </span></p>
<p><span style="font-size: small;">&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; trace preprocessor if available.</span></p>
<p><span style="font-size: small;">&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; VERSION.SERIAL.POWERPROBE() Returns the serial number of your PowerProbe logic analyzer if available</span></p>
<p><span style="font-size: small;">&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; VERSION.SERIAL.Integrator() Returns the serial number of your PowerIntegrator or PowerIntegrator-II logic analyzer</span></p>
<p>&nbsp;</p>
<p><strong><span style="font-size: small;">Build Number 01/2015</span></strong></p>
<p><span style="font-size: small;">Architecture : all</span></p>
<p><span style="font-size: small;">Affected commands : COVerage.MAP</span></p>
<p><span style="font-size: small;">Description :&nbsp; Added a new command. COVerage.MAP maps the code coverage information from a source range to a destination range.</span></p>
<p>&nbsp;</p>
<p><span style="font-size: small;">Architecture : all</span></p>
<p><span style="font-size: small;">Affected commands : WinPrint</span></p>
<p><span style="font-size: small;">Description :&nbsp; Added a new file type "XML". May need additional testing due to the way our windows are implemented.</span></p>
<p>&nbsp;</p>
<p><strong><span style="font-size: small;">Build Number 2015-01-22</span></strong></p>
<p><span style="font-size: small;">Architecture : MicroBlaze</span></p>
<p><span style="font-size: small;">Affected commands : JTAG.LAODBIT</span></p>
<p><span style="font-size: small;">Description :&nbsp; Support for configuration of Xilinx FPGAs including 7series family. Speed up by factor of 8x-10x.</span></p>
<p>&nbsp;</p>
<p><strong><span style="font-size: small;">Build Number 2014-12-12</span></strong></p>
<p><span style="font-size: small;">Architecture : PowerPC</span></p>
<p><span style="font-size: small;">Affected commands : VxWorks Awareness</span></p>
<p><span style="font-size: small;">Description :&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Confirmed support for VxWorks 7</span></p>
<p>&nbsp;</p>
<p><strong><span style="font-size: small;">Build Number 2015-01-16</span></strong></p>
<p><span style="font-size: small;">Architecture : ARM</span></p>
<p><span style="font-size: small;">Affected commands : MQX Awareness</span></p>
<p><span style="font-size: small;">Description :&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Support Task Context on Cortex-A</span></p>
<p>&nbsp;</p>
<p>&nbsp;</p>
<p><strong><span style="font-size: small;">Build Number 2015-01-01</span></strong></p>
<p><span style="font-size: small;">Architecture : all</span></p>
<p><span style="font-size: small;">Affected commands : Trace.REF</span></p>
<p><span style="font-size: small;">Description : Reference record also contains exact time information of selection (and not just the time of the record).</span></p>
<p>&nbsp;</p>
<p><strong><span style="font-size: small;">Build Number 59425, 2015-01-03</span></strong></p>
<p><span style="font-size: small;">Architecture : all</span></p>
<p><span style="font-size: small;">Affected commands : List, SETUP.DIS</span></p>
<p><span style="font-size: small;">Description : List window can show bookmark contents as comment in disassembler.</span></p>
<p>&nbsp;</p>
<p><strong><span style="font-size: small;">Build Number 59432, 2015-01-05</span></strong></p>
<p><span style="font-size: small;">Architecture : all</span></p>
<p><span style="font-size: small;">Affected commands : List, ISTAT</span></p>
<p><span style="font-size: small;">Description :&nbsp; ISTAT analysis can show which instructions where hit by interrupts or exceptions.</span></p>
<p>&nbsp;</p>
<p><strong><span style="font-size: small;">Build Number 59433, 2015-01-05</span></strong></p>
<p><span style="font-size: small;">Architecture : x86,x64</span></p>
<p><span style="font-size: small;">Affected commands : Data.LOAD.ELF</span></p>
<p><span style="font-size: small;">Description : Memory access changed - will now use logical memory access when load is not done to a physical address.</span></p>
<p>&nbsp;</p>
<p><strong><span style="font-size: small;">Build Number 59483, 2015-01-08</span></strong></p>
<p><span style="font-size: small;">Architecture : ARM</span></p>
<p><span style="font-size: small;">Affected commands : Break</span></p>
<p><span style="font-size: small;">Description : Onchip breakpoints are now secure/nonsecure/hypervisor aware when SYStem.Option ZoneSPACES is enabled.</span></p>
<p>&nbsp;</p>
<p><strong><span style="font-size: small;">Build Number 59639, 2015-01-13</span></strong></p>
<p><span style="font-size: small;">Architecture : all</span></p>
<p><span style="font-size: small;">Affected commands : Data.PROLOG/Data.EPILOG/Data.SOFTPROLOG/Data.SOFTEPILOG/Data.STARTUP/Data.TIMER/FLASH.PROLOG/FLASH.EPILOG</span></p>
<p><span style="font-size: small;">Description :&nbsp; Sequences can be supplied for each core in an SMP system.</span></p>
<p>&nbsp;</p>
<p><strong><span style="font-size: small;">Build Number 59653, 2015-01-14</span></strong></p>
<p><span style="font-size: small;">Architecture : Coldfire V2/V3</span></p>
<p><span style="font-size: small;">Affected commands : Break.Set</span></p>
<p><span style="font-size: small;">Description :&nbsp; TraceTrigger breakpoints supported.</span></p>
<p>&nbsp;</p>
<p><strong><span style="font-size: small;">Build Number 59694, 2015-01-15</span></strong></p>
<p><span style="font-size: small;">Architecture : all</span></p>
<p><span style="font-size: small;">Affected commands : Data.LOAD.ELF</span></p>
<p><span style="font-size: small;">Description :&nbsp; RELOC AFTER algorithm changed to also consider alignment of section. RELOC AFTERALIGN provides override.</span></p>
<p>&nbsp;</p>
<p><strong><span style="font-size: small;">Build Number 59736, 2015-01-16</span></strong></p>
<p><span style="font-size: small;">Architecture : ARM ETMv1, ARM ETMv3</span></p>
<p><span style="font-size: small;">Affected commands : ETM.DataTracePrestore</span></p>
<p><span style="font-size: small;">Description : "Analyzer.Mode Prestore" removed. Functionality extended (like on ICE) and moved to ETM.DataTracePrestore.</span></p>
<p>&nbsp;</p>
<p>&nbsp;</p>
<p><strong><span style="font-size: small;">Build Number 60021, 2015-01-26</span></strong></p>
<p><span style="font-size: small;">Architecture : all</span></p>
<p><span style="font-size: small;">Affected commands : Var.Set</span></p>
<p><span style="font-size: small;">Description :&nbsp; C/C++ expression parser extended to support scaled assignment (e.g. for ASAP file format).</span></p>
<p>&nbsp;</p>
<p><strong><span style="font-size: large;">New peripheral files:</span></strong></p>
<p><span style="font-size: small;">pers6j320.per&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; new for S6J320CQX</span></p>
<p><span style="font-size: small;">percn78xx.per&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; new for CN78XX</span></p>
<p><span style="font-size: small;">peratsamr21.per&nbsp;&nbsp;&nbsp; new for ATSAMR21E16A, ATSAMR21E17A, ATSAMR21E18A, ATSAMR21G16A, ATSAMR21G17A, ATSAMR21G18A</span></p>
<p><span style="font-size: small;">perspc58ne.per&nbsp;&nbsp;&nbsp;&nbsp; updated for SPC58NE84</span></p>
<p><span style="font-size: small;">permsp430f5xxx.per updated for MSP430</span></p>
<p>&nbsp;</p>
<p><strong><span style="font-size: large;">New/updated FLASH support:</span></strong></p>
<p><span style="font-size: small;">-emmc : TI DM365 series support (omap-l138,am18xx, dm365 ...)</span></p>
<p><span style="font-size: small;">-nand : 4KB page size supports for TI gpmi NAND controller</span></p>
<p>&nbsp;</p>
<p>&nbsp;</p>
<h2><span style="font-size: large; color: #888888;"><strong>December. 2014</strong></span></h2>
<p><span style="font-size: large;"><strong>New TRACE32 Feature</strong></span></p>
<p><strong><span style="font-size: small;">Build Number 2014-12</span></strong></p>
<p><span style="font-size: small;">Architecture : ALL</span></p>
<p><span style="font-size: small;">Affected commands : New respectively renamed commands Trace.STATistic.INTERRUPT, Trace.STATistic.TASKORINTERRUPT, Trace.STATIistic.TASKVSINTERRUPT</span></p>
<p><span style="font-size: small;">Description : Commands to analyze interrupt timing</span></p>
<p>&nbsp;</p>
<p><strong><span style="font-size: small;">Build Number 2014-12</span></strong></p>
<p><span style="font-size: small;">Architecture : MPC, ARM</span></p>
<p><span style="font-size: small;">Affected commands : PERF.STREAM ON</span></p>
<p><span style="font-size: small;">Description :&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; PC sampling is done by software running in the debugger hardware, instead of host software</span></p>
<p><span style="font-size: small;">&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Less intrusive, more samples per second</span></p>
<p>&nbsp;</p>
<p><strong><span style="font-size: small;">Build Number 2014-12</span></strong></p>
<p><span style="font-size: small;">Architecture : ARM</span></p>
<p><span style="font-size: small;">Affected commands : SYStem.CONFIG PortSHaRing ON|OFF</span></p>
<p><span style="font-size: small;">Description : Port sharing with other calibration (like the ETAS ETK) tools is now officially supported for ARM.</span></p>
<p>&nbsp;</p>
<p><strong><span style="font-size: small;">Build Number 2014-12</span></strong></p>
<p><span style="font-size: small;">Architecture : ALL</span></p>
<p><span style="font-size: small;">Affected commands : none</span></p>
<p><span style="font-size: small;">Description :&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; t32mciserver can stay alive after the last T32 quits and keep connection to debug port by option "keepalive". t32mciserver can be shut down by CTRL-C or Signal.</span></p>
<p>&nbsp;</p>
<p><strong><span style="font-size: small;">Build Number 2014-12</span></strong></p>
<p><span style="font-size: small;">Architecture : ALL</span></p>
<p><span style="font-size: small;">Affected commands : SYStem.PAUSE &lt;time&gt; /Target</span></p>
<p><span style="font-size: small;">Description : The command is similar to "wait &lt;time&gt;", but it executes the pause at the debug box or in the emulation / simulation.</span></p>
<p>&nbsp;</p>
<p><strong><span style="font-size: small;">Build Number 2014-12</span></strong></p>
<p><span style="font-size: small;">Architecture : ALL</span></p>
<p><span style="font-size: small;">Affected commands : SYStem.CONFIG.FAKEANALYZER &lt;on/off&gt;</span></p>
<p><span style="font-size: small;">Description :&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; The command enables the Analyzer parse path when no Analyzer is present to allow to configure the on-chip peripherals to be programmed to create trace signals at the trace ports.</span></p>
<p>&nbsp;</p>
<p><strong><span style="font-size: small;">Build Number 2014-12</span></strong></p>
<p><span style="font-size: small;">Architecture : ALL</span></p>
<p><span style="font-size: small;">Affected commands : SYStem.Polling , &lt;stopped mode&gt;</span></p>
<p><span style="font-size: small;">Description :&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; extend system.polling command to change the behavior when the CPU is stopped and the CPU is polled. "SYStem.Polling , OFF" can speed up TRACE32 in emulation/simulations because no polling is done when the CPU is stopped.</span></p>
<p>&nbsp;</p>
<p><strong><span style="font-size: small;">Build Number 2014-11-26</span></strong></p>
<p><span style="font-size: small;">Architecture : ARM</span></p>
<p><span style="font-size: small;">Affected commands : PikeOS Awareness</span></p>
<p><span style="font-size: small;">Description :&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Support for "System Extensions"</span></p>
<p>&nbsp;</p>
<p><strong><span style="font-size: small;">Build Number 2014-11-28</span></strong></p>
<p><span style="font-size: small;">Architecture : all</span></p>
<p><span style="font-size: small;">Affected commands : QNX Awareness, TASK.PIDIN PMEM/MEM</span></p>
<p><span style="font-size: small;">Description : Display of process memory maps</span></p>
<p>&nbsp;</p>
<p><strong><span style="font-size: small;">Build Number 2014-12</span></strong></p>
<p><span style="font-size: small;">Architecture : x86/x64</span></p>
<p><span style="font-size: small;">Affected commands : WinSTD Awareness</span></p>
<p><span style="font-size: small;">Description :&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Win7 and Win8 (64 and 32bit) now supported by the awareness</span></p>
<p>&nbsp;</p>
<p><strong><span style="font-size: small;">Build Number 2014-11-19</span></strong></p>
<p><span style="font-size: small;">Architecture : S12/S12X/S12Z: Automated CPU detection at SYStem.Up</span></p>
<p><span style="font-size: small;">Affected commands :&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -</span></p>
<p><span style="font-size: small;">Description : Use SYStem.CPU MCS12Z for S12Z devices</span></p>
<p>&nbsp;</p>
<p><strong><span style="font-size: large;">New peripheral files:</span></strong></p>
<p><span style="font-size: small;">perk50.per MK50D series</span></p>
<p><span style="font-size: small;">perk60.per MK60D series&nbsp;</span></p>
<p><span style="font-size: small;">perk70.per MK70D series</span></p>
<p><span style="font-size: small;">pert2xxx.per&nbsp; new for T2080</span></p>
<p>&nbsp;</p>
<p><strong><span style="font-size: large;">New/updated FLASH support:</span></strong></p>
<p><span style="font-size: small;">Build Number 2014-12-04</span></p>
<p><span style="font-size: small;">Architecture : S12Z: MCS12ZVL32 based derivatives</span></p>
<p><span style="font-size: small;">Description :&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Support for derivatives with small onchip RAM</span></p>
<p>&nbsp;</p>
<p><strong><span style="font-size: large;">New/updated web pages:</span></strong></p>
<p><span style="font-size: small;">-The homepage about CombiProbe (cobstm.html) has been detached by CombiProbe ARM</span></p>
<p><span style="font-size: small;"><a href="http://www.lauterbach.com/cobarm.html" target="_blank">http://www.lauterbach.com/cobarm.html</a></span></p>
<p>&nbsp;</p>
<p><span style="font-size: small;">-The homepages about PowerDebug Ethernet and PowerDebug II have been detached by PowerDebug PRO:</span></p>
<p><span style="font-size: small;"><a href="http://www.lauterbach.com/powerdebugpro.html" target="_blank">http://www.lauterbach.com/powerdebugpro.html</a></span></p>
<p>&nbsp;</p>
<p><span style="font-size: small;">-The homepage about PowerTrace has been detached by PowerTrace PX:</span></p>
<p><span style="font-size: small;"><a href="http://www.lauterbach.com/powertracepx.html" target="_blank">http://www.lauterbach.com/powertracepx.html</a></span></p>
<p>&nbsp;</p>
<p><span style="font-size: large;"><strong>Other news:</strong></span></p>
<p><span style="font-size: small;">-Our next PRACTICE Tutorial is available. In the second Tutorial Linda tells something about the Conditional Execution in PRACTICE:</span></p>
<p><span style="font-size: small;"><a href="http://www.lauterbach.com/frames.html?tut_practice.html" target="_blank">http://www.lauterbach.com/frames.html?tut_practice.html</a></span></p>
<p>&nbsp;</p>
<p><span style="font-size: small;">-Lauterbach can now be found on YouTube. This is the Lauterbach YouTube Channel:</span></p>
<p><span style="font-size: small;"><a href="http://www.youtube.com/user/lauterbachgmbh" target="_blank">http://www.youtube.com/user/lauterbachgmbh</a></span></p>
<p>&nbsp;</p>
<p>&nbsp;</p>
<h2><span style="font-size: large; color: #888888;"><strong>November. 2014</strong></span></h2>
<p><span style="font-size: large;"><strong>New TRACE32 Feature</strong></span></p>
<p><span style="font-size: small;"><strong>Build Number 58496, 2014-11-21</strong></span></p>
<p><span style="font-size: small;">Architecture :&nbsp; MicroBlaze</span></p>
<p><span style="font-size: small;">Description :&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Support for MicroBlaze V9.5.</span></p>
<p>&nbsp;</p>
<p><span style="font-size: small;"><strong>Build Number 57957, 2014-11-05</strong></span></p>
<p><span style="font-size: small;">Architecture : ARM64</span></p>
<p><span style="font-size: small;">Description :&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Added changes to support ARM Versatile Express Juno board.</span></p>
<p>&nbsp;</p>
<p><span style="font-size: small;"><strong>Build Number 58358, 2014-11-18</strong></span></p>
<p><span style="font-size: small;">Architecture : Star12Z</span></p>
<p><span style="font-size: small;">Affected commands : FLASH</span></p>
<p><span style="font-size: small;">Description :&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Flash programming support added for MCS12Z derivatives with small RAM size, like MCS12ZVL32</span></p>
<p>&nbsp;</p>
<p><span style="font-size: small;"><strong>Build Number 58169, 2014-11-12</strong></span></p>
<p><span style="font-size: small;">Architecture :&nbsp; ALL</span></p>
<p><span style="font-size: small;">Affected commands : PSTEPOUT</span></p>
<p><span style="font-size: small;">Description :&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; The new PRACTICE debugging command PSTEPOUT was added to enable a new stepping out functionality.</span></p>
<p><span style="font-size: small;">&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; It is possible to step out from a deeper block up to the higher DO or GOSUB PRACTICE stack element.</span></p>
<p><span style="font-size: small;">&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;The functionality was integrated in form of a local button to the windows PLIST, PSTEP and PMACRO.</span></p>
<p>&nbsp;</p>
<p><span style="font-size: small;"><strong>Build Number 58374, 2014-11-18</strong></span></p>
<p><span style="font-size: small;">Architecture : ALL</span></p>
<p><span style="font-size: small;">Affected commands : TRACE.EXPORT.TASKEVENTS</span></p>
<p><span style="font-size: small;">Description :&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; print out the core number message on the SMP systems</span></p>
<p>&nbsp;</p>
<p><span style="font-size: small;"><strong>Build Number 58288, 2014-11-14</strong></span></p>
<p><span style="font-size: small;">Architecture : ALL</span></p>
<p><span style="font-size: small;">Affected commands : FLASHFILE</span></p>
<p><span style="font-size: small;">Description :&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; flashfile commands support for ARMv8 (arm64)</span></p>
<p>&nbsp;</p>
<p><span style="font-size: small;">Build Number 2014-11-12</span></p>
<p><span style="font-size: small;">Architecuture :&nbsp;&nbsp; PowerPC</span></p>
<p><span style="font-size: small;">Affected commands : embOS Awareness</span></p>
<p><span style="font-size: small;">Description :&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; embOS Awareness extended to PowerPC</span></p>
<p>&nbsp;</p>
<p><span style="font-size: small;">Build Number 2014-11-14</span></p>
<p><span style="font-size: small;">Architecuture :&nbsp;&nbsp; ARM, ARM64</span></p>
<p><span style="font-size: small;">Affected commands : UEFI TianoCore</span></p>
<p><span style="font-size: small;">Description :&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Documentation for TianoCore on ARM</span></p>
<p>&nbsp;</p>
<p><span style="font-size: small;">New peripheral files:</span></p>
<p>&nbsp;</p>
<p><span style="font-size: small;">perk10.per&nbsp; for MK10D series&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</span></p>
<p><span style="font-size: small;">perk20.per&nbsp; for MK20D series</span></p>
<p><span style="font-size: small;">perk30.per&nbsp; for MK30D series</span></p>
<p><span style="font-size: small;">perk40.per&nbsp; for MK40D series</span></p>
<p><span style="font-size: small;">perspc574sxx.per&nbsp; updated for SPC574Sxx</span></p>
<p><span style="font-size: small;">perspear1380.per&nbsp; new file added for: SPEAR1380</span></p>
<p><span style="font-size: small;">peratsama5.per&nbsp;&nbsp;&nbsp; updated for ATSAMA5D36</span></p>
<p>&nbsp;</p>
<p>&nbsp;</p>
<p><span style="font-size: small;">New/updated FLASH support:</span></p>
<p><span style="font-size: small;">-apm88xx0x : new SPI flash support</span></p>
<p><span style="font-size: small;">-armada38x : new NAND flash support</span></p>
<p><span style="font-size: small;">-nand: support MT29F8G08ABAC( Micron, nand8g08xs224 type (4KB/224B) )</span></p>
<p><br /> <br /></p>
<h2><span style="font-size: large; color: #888888;"><strong>Octover. 2014</strong></span></h2>
<p><span style="font-size: large;"><strong>New TRACE32 Feature</strong></span></p>
<p><span style="font-size: small;"><strong>Build Number 56530, 2014-09-17</strong></span></p>
<p><span style="font-size: small;">- Architecture : BLACKFIN</span></p>
<p><span style="font-size: small;">- Support DAP, and access the coresight components</span></p>
<p>&nbsp;</p>
<p><span style="font-size: small;"><strong>Build Number 56230, 2014-09-05</strong></span></p>
<p><span style="font-size: small;">- Architecture : ALL</span></p>
<p><span style="font-size: small;">- Affected commands : Trace.EXPORT.CSVFunc</span></p>
<p><span style="font-size: small;">- Export traced function entry/exit and task switch information as a CSV format.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</span></p>
<p>&nbsp;</p>
<p><span style="font-size: small;"><strong>Build Number 56629, 2014-09-23</strong></span></p>
<p><span style="font-size: small;">- Architecture : ARM</span></p>
<p><span style="font-size: small;">- New access class M: introduced to access data in context of monitor mode / EL3</span></p>
<p>&nbsp;</p>
<p><span style="font-size: small;"><strong>Build Version 2014-07-30</strong></span></p>
<p><span style="font-size: small;">- Architecture : x64</span></p>
<p><span style="font-size: small;">- Affected commands : UEFI Awareness</span></p>
<p><span style="font-size: small;">- Support Intel BLDK 64bit</span></p>
<p>&nbsp;</p>
<p><span style="font-size: small;"><strong>Build Version 2014-08-06</strong></span></p>
<p><span style="font-size: small;">- Architecture : all</span></p>
<p><span style="font-size: small;">- Affected commands : ThreadX TASK.THread</span></p>
<p><span style="font-size: small;">- Added sorting with /SORTup and /SORTDOWN option</span></p>
<p>&nbsp;</p>
<p><span style="font-size: small;"><strong>Build Version 2014-08-08</strong></span></p>
<p><span style="font-size: small;">- Architecture : all</span></p>
<p><span style="font-size: small;">- Affected commands : FreeRTOS TASK.TaskList</span></p>
<p><span style="font-size: small;">- Added sorting by clicking on column header</span></p>
<p>&nbsp;</p>
<p><span style="font-size: small;"><strong>Build Version 2014-08-13</strong></span></p>
<p><span style="font-size: small;">- Architecture : ARM</span></p>
<p><span style="font-size: small;">- Affected commands : NutOS Awareness</span></p>
<p><span style="font-size: small;">- Basic support for NutOS (no documentation)</span></p>
<p>&nbsp;</p>
<p><span style="font-size: small;"><strong>Build Version 2014-08-18</strong></span></p>
<p><span style="font-size: small;">- Architecture : ARM</span></p>
<p><span style="font-size: small;">- Affected commands :&nbsp;&nbsp;&nbsp; NuttX Awareness</span></p>
<p><span style="font-size: small;">- Basic support for NuttX (no documentation)</span></p>
<p>&nbsp;</p>
<p><span style="font-size: small;"><strong>Build Number 55852, 2014-08-20</strong></span></p>
<p><span style="font-size: small;">- Architecture : all</span></p>
<p><span style="font-size: small;">- Affected commands&gt;: Task.STacK.view</span></p>
<p><span style="font-size: small;">- New option /HumanReadable</span></p>
<p>&nbsp;</p>
<p><span style="font-size: small;">Build Version 2014-08-27</span></p>
<p><span style="font-size: small;">- Architecture : all</span></p>
<p><span style="font-size: small;">- Affected commands : Remote API</span></p>
<p><span style="font-size: small;">- API Call Log to file</span></p>
<p>&nbsp;</p>
<p><span style="font-size: small;"><strong>New/updated FLASH support:</strong></span></p>
<p><span style="font-size: small;">Microblaze-SPI&nbsp; new, support little endian controller</span></p>
<p><span style="font-size: small;">Kinetis MKE02, MKE06, MKV10&nbsp;&nbsp;&nbsp;&nbsp; new, processor internal</span></p>
<p><span style="font-size: small;">Atmel ATSAM4C&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; new, processor internal</span></p>
<p>&nbsp;</p>
<p><span style="font-size: small;"><strong>New/updated web pages</strong></span></p>
<p><span style="font-size: small;">Now available: Tutorials Debugging PRACTICE by Linda Bahloul - the first Tutorial is online now!</span></p>
<p><span style="font-size: small;"><a href="http://www.lauterbach.com/tut_practice.html" target="_blank">http://www.lauterbach.com/tut_practice.html</a></span></p>